November 27, 2017

SLAC-led Study Shows Potential for Efficiently Controlling 2-D Materials With Light

In experiments with the lab’s ultrafast ‘electron camera,’ laser light hitting a material is almost completely converted into nuclear vibrations, which are key to switching a material’s properties on and off for future electronics and other applications.

By Manuel Gnida

Materials that are only a few atomic layers thick have generated a lot of excitement in recent years. These 2-D materials can have intriguing properties, such as extraordinary mechanical strength and superior electrical and heat conductivity, and could benefit a number of next-generation applications, including flexible electronics, data storage devices, solar cells, light-emitting diodes and chemical catalysts. Researchers also think they may be able to customize the properties of these materials by using light pulses to rapidly switch them from one state, or phase, to another, for example from an insulating to a conducting state.

However, the ability to do this depends on how efficiently the light’s energy is transferred to the material’s atomic nuclei. Now, a team led by researchers from the Department of Energy’s SLAC National Accelerator Laboratory has demonstrated for the first time that the energy transfer is very fast and extremely efficient.

“Our data show that essentially all of the light energy gets converted into vibrations of the material's atomic nuclei within a trillionth of a second,” says SLAC’s Ming-Fu Lin, the lead author of a study published Nov. 23 in Nature Communications. “This efficient energy conversion is crucial, because those nuclear motions can initiate what we call a phase transition in the material – a change that alters its properties.”  

The researchers looked at a sample made of two layers of molybdenum diselenide – a model system for 2-D materials that can potentially be switched from a semiconducting state to a metal state and vice versa. They first hit the sample with a very brief laser pulse and then observed how its energy spread into the material over time with SLAC’s ultrafast “electron camera” – an apparatus for ultrafast electron diffraction (UED) that uses a highly energetic electron beam to probe a sample’s atomic structure and nuclear motions.

"UED is a powerful tool for studies of these very thin 2-D materials," says SLAC staff scientist Xiaozhe Shen, a co-author of the paper. "The technique yields relatively strong signals, high spatial resolution, and it nicely complements X-ray laser studies in making movies of a material’s atomic structure.”

Although the researchers didn’t see a phase transition in molybdenum diselenide, their results help them better understand the energy transfer from the laser light to the material.

“It’s an important first step toward designing 2-D materials that we can control with light,” Lin says. “The next steps will be to find out if we can see light-induced phase transitions in other materials and if we can make materials whose properties we can alter in a controlled way by steering phase transitions in particular directions.”

The results are also used for the validation of novel software developed by the Materials Genome Innovation for Computational Software (MAGICS) center, led by the University of Southern California, Los Angeles. Another MAGICS partner involved in the study was Rice University, where the 2-D material was synthesized.

“Similar to biological genome projects that want to find out everything about the genomes of organisms, our goal is to learn everything about materials and to develop computational tools that allow us to make accurate predictions of material properties,” says SLAC’s Uwe Bergmann, the center’s associate director for validation and the principal investigator of the study. “MAGICS brings together researchers who develop advanced computer code, who take on the challenging synthesis of 2-D materials, and who provide the experimental data needed for testing the computer models. At SLAC, we’re doing UED experiments and ultrafast X-ray studies, but without the center’s team effort, this work wouldn’t be possible.”

Experiments for this study were carried out by researchers from SLAC’s Linac Coherent Light Source (LCLS), a DOE Office of Science User Facility; the Stanford PULSE Institute, which is jointly operated by SLAC and Stanford University; and the lab’s Accelerator Directorate. Samples came from Rice University, and computer simulations were done at USC. Additional MAGICS partners not involved in this study are DOE’s Lawrence Berkeley National Laboratory, the University of Missouri and the California Institute of Technology. The study was funded by the DOE Office of Science and the National Science Foundation.            


Citation: M. Lin et al., Nature Communications, 23 November 2017 (10.1038/s41467-017-01822-2)

For questions or comments, contact the SLAC Office of Communications at communications@slac.stanford.edu.


SLAC is a multi-program laboratory exploring frontier questions in photon science, astrophysics, particle physics and accelerator research. Located in Menlo Park, Calif., SLAC is operated by Stanford University for the U.S. Department of Energy's Office of Science.

SLAC National Accelerator Laboratory is supported by the Office of Science of the U.S. Department of Energy. The Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.

UED Molybdenum Diselenide
Simulation of a laser pulse’s effect on two layers of molybdenum diselenide. (Hiroyuki Kumazoe/USC)
Dig Deeper

Related stories

News Feature

SLAC works with two small businesses to make its ACE3P software easier to use in supercomputer simulations for optimizing the shapes of accelerator structures.

A large, complex shape is seen against a blue background crisscrossed with white lines. The shape is dark blue and resembles a brick partially topped with a thick shark’s fin. Three areas of bright red, orange and green, are on the shape’s bottom edge.
News Feature

An extension of the Stanford Research Computing Facility will host several data centers to handle the unprecedented data streams that will be produced by...

SRCF-II
News Brief

Knowing a magnet’s past will allow scientists to customize particle beams more precisely in the future. As accelerators stretch for higher levels of performance...

A magnet on a test stand inside SLAC National Accelerator Laboratory.
News Feature

SLAC works with two small businesses to make its ACE3P software easier to use in supercomputer simulations for optimizing the shapes of accelerator structures.

A large, complex shape is seen against a blue background crisscrossed with white lines. The shape is dark blue and resembles a brick partially topped with a thick shark’s fin. Three areas of bright red, orange and green, are on the shape’s bottom edge.
News Feature

An extension of the Stanford Research Computing Facility will host several data centers to handle the unprecedented data streams that will be produced by...

SRCF-II
News Brief

Knowing a magnet’s past will allow scientists to customize particle beams more precisely in the future. As accelerators stretch for higher levels of performance...

A magnet on a test stand inside SLAC National Accelerator Laboratory.
News Feature

Edelen draws on machine learning to fine tune particle accelerators, while Kurinsky develops dark matter detectors informed by quantum information science.

Side by side photographs of a woman and a man.
Press Release

The facility, LCLS-II, will soon sharpen our view of how nature works on ultrasmall, ultrafast scales, impacting everything from quantum devices to clean energy.

LCLS-II cooldown
News Feature

The leaders of SLAC's Technology Innovation Directorate discuss how their group supports the lab's most innovative projects.

TID senior managers