April 24, 2014

Scientists Watch High-temperature Superconductivity Emerge out of Magnetism

Scientists at SLAC and Stanford show how high-temperature superconductivity emerges out of magnetism in an iron pnictide, a class of materials with great potential for making devices that conduct electricity with 100 percent efficiency.

By Glennda Chui

Scientists at SLAC National Accelerator Laboratory and Stanford University have shown for the first time how high-temperature superconductivity emerges out of magnetism in an iron pnictide, a class of materials with great potential for making devices that conduct electricity with 100 percent efficiency.

In experiments at SLAC’s Stanford Synchrotron Radiation Lightsource (SSRL), the team “doped” the material – one of two known types of high-temperature superconductor – by adding or subtracting electrons to enhance its superconducting abilities. Then they used a beam of ultraviolet light to measure changes in the material’s electronic behavior as it was chilled to a temperature where superconductivity becomes possible.

The researchers saw the two states battle for dominance: At first the electrons in the material all lined up with their spins pointed in specific directions, a hallmark of magnetism. But as the temperature dropped, a few electrons paired up, like dancers at a party, to effortlessly conduct electricity; then a few more; until finally all the active electrons found partners and the material was fully superconducting, a much more complex behavior.

The results, published April 25 in Nature Communications, are an important step toward understanding how high-temperature superconductors work – information scientists need to realize their dream of engineering superconductors with more useful properties that operate at close to room temperature for a variety of practical applications.

Complexity Emerges from Simple Ingredients

“For a while both magnetism and superconductivity co-exist; that’s not a surprise,” said Ming Yi, a graduate student with the Stanford Institute for Materials and Energy Sciences (SIMES) and lead author of the report. “But we wanted to see how just these two phases interact with each other. Now we finally have the high-resolution tools we need to see these changes at a microscopic level, and we find that the same electrons that were participating in the magnetic order have switched over to participate in the superconducting order. These two orders compete for the same electrons.’’

Comparing their experimental data to the results of simulations, the researchers determined that the magnetism and superconductivity in iron pnictide were interwoven at a very fine, microscopic level, rather than occupying larger, separate puddles within the material. The simulations were led by theorists Lex Kemper of Lawrence Berkeley National Laboratory, Stanford graduate student Nachum Plonka and SIMES Director Thomas Devereaux.

“This is a beautiful example of ‘emergence,’ in which simple ingredients give rise to complex behavior,” said co-author Zhi-Xun Shen, a professor at SLAC and Stanford and SLAC’s advisor for science and technology. "Emergence is a major theme of modern research on organizing principles of nature,” he said. “Our hope is that research on quantum systems like this one, which are very simple model systems, will eventually give us insights into such organizing principles.”

Exploring a Mystery Material

Discovered in 1986, high-temperature superconductors carry electricity without any loss at much warmer temperatures than conventional superconductors, which have to be chilled to at least 30 kelvins (minus 243 degrees Celsius). Still, scientists have not been able to get high-temperature superconductors to operate above minus 138 degrees Celsius.

While these materials have the potential to save money and energy in a number of applications, from carrying electricity over long-distance power lines to operating maglev trains, the high cost and logistics of keeping them cold and their difficult-to-handle properties have held them back. 

As in regular superconductors, electrons in high-temperature superconductors form pairs to conduct current. But the mechanism behind this pairing in the high-temperature materials – the “glue” that holds the electrons together – is still unknown, said Donghui Lu, a senior staff scientist at SSRL and one of the principal investigators for the study.

Another mystery: In theory, superconductivity and magnetism are not supposed to co-exist; the presence of one should drive out the other. But previous studies have shown they can in fact exist in the same material, and scientists have been eager to learn the details of how and why that happens.

While this study doesn’t answer those burning questions, it does give scientists a closer look at the details of what happens as superconductivity emerges.

The results may also shed light on the other known family of high-temperature superconductors, the copper-based cuprates, the scientists wrote, and comparing results from the two may lead to “an eventual understanding of the mechanism of unconventional superconductivity.”

In addition to SLAC and SIMES, which is a joint SLAC/Stanford institute, researchers from Stanford University, Lawrence Berkeley National Laboratory, Nanjing University, and the University of California-Berkeley contributed to this work. Some measurements were carried out at Berkeley Lab’s Advanced Light Source. The work at Stanford, SLAC and the Advanced Light Source was funded by the U.S. Department of Energy Office of Science.

Citation: M. Yi et al., Nature Communications 5, Article number:3711, doi:10.1038/ncomms4711


SLAC is a multi-program laboratory exploring frontier questions in photon science, astrophysics, particle physics and accelerator research. Located in Menlo Park, Calif., SLAC is operated by Stanford University for the U.S. Department of Energy's Office of Science.

The Stanford Institute for Materials and Energy Sciences (SIMES) is a joint institute of SLAC National Accelerator Laboratory and Stanford University. SIMES studies the nature, properties and synthesis of complex and novel materials in the effort to create clean, renewable energy technologies. For more information, please visit simes.slac.stanford.edu.

SLAC’s Stanford Synchrotron Radiation Lightsource (SSRL) is a third-generation light source producing extremely bright X-rays for basic and applied science. A DOE national user facility, SSRL attracts and supports scientists from around the world who use its state-of-the-art capabilities to make discoveries that benefit society. For more information, visit ssrl.slac.stanford.edu.

DOE’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.

An illustration of electrons pairing up like dancers at a party
A SLAC/Stanford study reveals how high-temperature superconductivity emerges out of magnetism in an iron pnictide. At first the material’s electrons line up with their spins pointed in specific directions, a hallmark of magnetism. But as the temperature drops, a few electrons pair up, like dancers at a party, to effortlessly conduct electricity; then a few more; until finally all the active electrons find partners and the material is fully superconducting. (Ming Yi/Stanford University)
Image of a small magnet levitating above a superconducting material
Superconducting materials expel magnetic fields, whose repulsive force can levitate a magnet, as shown here. Nevertheless, studies have shown superconductivity and magnetism can coexist in the same material. Now SLAC and Stanford researchers show that the two phases are interwoven at a very fine, microscopic level in a type of high-temperature superconductor known as an iron pnictide, and reveal how one phase gives way to the other. (Julien Bobroff, Frederic Bouquet and Jeffrey Quilliam/Laboratory of Solid State Physics, LPS, via Wikimedia Commons)
Report co-authors Donghui Lu and Ming Yi
Two of the report’s co-authors: Donghui Lu, left, a senior staff scientist with SLAC’s Stanford Synchrotron Radiation Lightsource (SSRL), and Ming Yi, a graduate student with SIMES, the Stanford Institute for Materials and Energy Sciences. (Fabricio Sousa/SLAC)
Dig Deeper

Related stories

News Brief

Devereaux was honored for contributions to materials science and was among seven Stanford-affiliated researchers named AAAS Fellows this year.

Thomas Devereaux
News Feature

Researchers have uncovered new insights about tungsten's ability to conduct heat, which could lead to materials advancements for fusion reactor and aerospace technologies.

tungsten
News Feature

Seen in atomic detail, the seemingly smooth flow of ions through a battery’s electrolyte is a lot more complicated.

Photo of the laser lab apparatus used in the hopping ions experiment.
News Brief

Devereaux was honored for contributions to materials science and was among seven Stanford-affiliated researchers named AAAS Fellows this year.

Thomas Devereaux
News Feature

Researchers have uncovered new insights about tungsten's ability to conduct heat, which could lead to materials advancements for fusion reactor and aerospace technologies.

tungsten
News Feature

Seen in atomic detail, the seemingly smooth flow of ions through a battery’s electrolyte is a lot more complicated.

Photo of the laser lab apparatus used in the hopping ions experiment.
News Feature

Wan-Lin Hu’s job is to improve the way people and artificial intelligence collaborate to run SLAC’s complex machines.

Wan-Lin Hu is seen talking with talks with accelerator systems operator Kabir Lubana in the lab’s main Accelerator Control Room.
News Feature

Researchers have discovered that crystals can twist when they are sandwiched between two substrates – a critical step toward exploring new material properties for...

This image shows a diffraction pattern of gold nanodics between substrates.
News Feature

The software tool sorts through messy data to reveal what’s really going on with solar panels on cloudy and sunny days.

This is a graphic representation of solar power system data. The data is processed by algorithms, which turn the data into specific power loss causes.